By Linda Sturdivant on February 09 2018 03:17:49
Insulated cables are rated by their allowable operating voltage and their maximum operating temperature at the conductor surface. A cable may carry multiple usage ratings for applications, for example, one rating for dry installations and another when exposed to moisture or oil.
Some components and symbols of wiring diagram are: Capacitor, used to store electric charge. Toggle Switch, stops the flow of current when open. Push Button Switch, momentarily allows current flow when button is pushed in, breaks current when released. Battery, stores electric charge and generates a constant voltage .Resistor, restricts current flow. Ground wire, used for protection. Circuit breaker, used to protect a circuit from an overload of current. Inductor, a coil that generates a magnetic field. Antenna, transmits and receives radio waves. Surge protector, used to protect a circuit from a spike in voltage. Lamp, generates light when current flows through. Diode, allows current to flow in one direction indicated by an arrowhead or triangle on the wire. Microphone, converts sound into electrical signal. Electrical motor. Transformer, changes AC voltage from high to low or vice versa. Headphone. Thermostat. Electrical outlet. Junction box.
Modern non-metallic sheathed cables, such as (US and Canadian) Types NMB and NMC, consist of two to four wires covered with thermoplastic insulation, plus a bare wire for grounding (bonding), surrounded by a flexible plastic jacket. Some versions wrap the individual conductors in paper before the plastic jacket is applied.
In a typical electrical code, some colour-coding of wires is mandatory. Many local rules and exceptions exist per country, state or region. Older installations vary in colour codes, and colours may fade with insulation exposure to heat, light and ageing.